All-in-One Ultrasonic Weather Station RS485 Modbus

All-in-One Ultrasonic Weather Station sensor is a fully digital detection, high-precision sensors, can quickly and accurately detect the wind speed, wind direction, atmospheric temperature, atmospheric humidity, atmospheric pressure, the built-in signal processing unit can be output according to the user's needs of the corresponding signals, can be optionally integrated with the PM2.5, PM10, noise, radiation, rain and other elements. High-strength structural design can work reliably in the harsh climate environment, high integration, rugged. Widely used in meteorology, environment, airports, harbours, laboratories, industry and agriculture, and transport.

All-in-One Ultrasonic Weather Station sensor Technical parameter：

The All-in-One Ultrasonic Weather Station is a multi-functional ultrasonic weather station in which wind speed and direction sensors are one of its important components. This weather station usually uses ultrasonic technology to measure wind speed and direction and has the following features:

1. No moving parts: Unlike traditional mechanical wind speed and direction instruments, ultrasonic weather stations have no moving parts and are therefore more durable and require less maintenance.

2. high accuracy: ultrasonic technology provides highly accurate wind speed and direction data that accurately reflect current meteorological conditions.

3. All-weather: These weather stations usually have all-weather capability and can work stably and reliably under adverse weather conditions.

4. Multi-parameter Measurement: In addition to wind speed and direction, some weather stations can also measure other meteorological parameters at the same time, such as temperature, humidity, barometric pressure, etc., providing comprehensive meteorological information.

5. Data Output: Through digital interface or other means, this kind of weather station can output real-time wind speed and direction data, which is convenient to be connected to the weather monitoring system or automation control system.

The wind speed and direction sensors in the All-in-One Ultrasonic Weather Station are widely used in the fields of meteorological monitoring, environmental monitoring, aerospace, marine engineering, etc. with its features of high accuracy, all-weatherability and reliability, and provide users with critical meteorological data support.

Weather Stations Technical parameter：

All-in-One Ultrasonic Weather Station Installation Precautions                        

Ultrasonic multi-factor integrated sensors can meet a number of specifications and can be used in different environments around the world, with no complex maintenance or calibration required in the field.

1. Check frequently to ensure that the sensor is not interfered with by other operating equipment such as radio/radar transmitters, ship engines, motors, etc;

2. Do not install on a level surface with any radar scanning device, at least a distance of 2 metres should be maintained;

3. It is recommended to keep a distance from some of the surrounding radio receiving antennas;

3. Installation position should be far away from the source of vibration;

4. use the cable recommended by our company;

5. If the cable is cut and not properly connected, or if the cable shield is not properly connected, just wire it according to the installation guide instructions;

6. Ensure that the equipment is supplied with a continuous power supply during operation;

7. Avoid flotsam from surrounding buildings such as trees, utility poles, tall buildings, etc., which can have an effect on the accuracy of the ultrasonic wind speed and direction meter;

The World Meteorological Organisation gives the following advice:

1. Meteorological instrument installation standards: 10 metres above ground level in open areas; open areas are defined as 10 metres above the height of any obstacle to the meteorological instrument;

2. If installed on a building, the theoretical height of the meteorological instrument installation should be 1.5 times the height of the building;

3. if mounted on a boom on a mast, a tower or a branch of a mast, the length of the boom or branch must be twice the minimum diameter or diagonal of the tower. The boom needs to be installed on the side of the prevailing wind;

All-in-One Ultrasonic Weather Station Installation Methods                            

Installation methods are as follows:

Positioning: generally the unit is mounted on a vertical mounting tube to ensure that measurements are taken on the same horizontal plane;

Alignment: the detector should be installed with the pointing point pointing north before fixing.

Note: It is ideal to use a standard compass to determine the geographic north pole direction during installation and to keep the instrument pointing north in the same direction as the compass;

Installation: The mounting tube requires 3 equally spaced holes, tapping M5 screws, positioned 7.5mm from the top of the tube, and passing the cable through the mounting tube;

NOTE: The user must properly strain relief the cable. The plug can be connected to the unit's plug by rotating the plug and gently pushing inwards. Once the plug is attached, the plug can be locked in place by turning the outer sleeve clockwise. The device can be fixed to the mounting tube using 3 stainless steel screws. The customer must ensure that the unit is installed in an open area so that surrounding buildings do not obstruct the airflow or cause flocculation. Do not install the unit next to radar or radio transmitters.