— Blogs —
—Products—
WhatsApp:+8615367865107
Address:Room 102, District D, Houhu Industrial Park, Yuelu District, Changsha City, Hunan Province, China
Product knowledge
Many people confuse the two concepts of LoRaWAN and LoRa. In fact, LoRaWAN refers to the networking protocol of the MAC layer. And LoRa is just a physical layer protocol. Although the existing LoRaWAN networking basically uses LoRa as the physical layer, the LoRaWAN protocol also lists that GFSK can also be used as the physical layer in some frequency bands.
IoT gateway can integrate the data collected by different terminals and transmit it to the next level to complete the transmission of information between each level. The IoT gateway can realize the protocol conversion between perception networks and communication networks, as well as between different types of perception networks; it can realize both wide area network communication and local area ···
MQTT and Modbus can complement each other to improve the performance of the Internet of Things. Using Modbus as a local interface to manage devices, and using MQTT as a global protocol to expand the range of devices, both have played an important role.
When the communication distance is tens of meters to thousands of meters, the RS-485 serial bus standard is widely used. RS-485 uses balanced transmission and differential reception, so it has the ability to suppress common mode interference. The standard value of the maximum transmission distance of the RS-485 interface is 4000 feet (about 1219 meters), which is actually up to 3000 meters. In add···
Serial port and COM port refer to the physical interface form (hardware). And TTL, RS-232, RS-485 refer to the level standard (electrical signal).
Modbus gateway can be called Ethernet communication gateway, it can realize the conversion between Modbus RTU/ASCII and Modbus TCP protocol. The Modbus protocol is divided into two types, one is Modbus RTU (or ASCII) based on RS485, and the other is Modbus TCP based on Ethernet. Modbus gateway is a converter that converts Modubs RTU device data into Modbus TCP data.
Design features of NB-IoT network:Ultra-low power consumption: With the addition of the PSM function, the current consumption of the terminal in this mode is about 3uA, even if the dry battery is used, the module can be driven for 10 years;
NB-IoT protocol is a set of wireless cellular network communication rules designed to make full use of precious wireless spectrum resources and time resources to meet the needs of LPWA. Its role is to formulate a set of syntax, semantics and timing for information interaction. In short It is the rules that stipulate what language the communication participants use, what they mean, and who speaks w···
LoRa spread spectrum principle: By using a high spreading factor, LoRa technology can transmit small-capacity data through a wide range of radio frequency spectrum. In fact, when you measure with a spectrum analyzer, the data looks like noise, but the difference is that the noise is uncorrelated, and the data is correlated. Based on this, the data can actually be extracted from the noise.
LoRa integrates digital spread spectrum, digital signal processing and forward error correction coding technology, with unprecedented performance. Previously, only those high-level industrial radio communications would integrate these technologies, and with the introduction of LoRa, the situation in the field of embedded wireless communications has undergone a complete change.
Screenshot, WhatsApp to identify the QR code
WhatsApp number:+8615367865107
(Click on WhatsApp to copy and add friends)